<正>The method of reverberation-ray matrix(MRRM) are modified and extended to the analysis of wave propagation ...
Yong-qiang GUO Key Laboratory of Mechanics on Disaster and Environment in Western China,Ministry of Education, and School of Civil Engineering and Mechanics,Lanzhou University,Lanzhou 730000,China Wei-qiu CHEN Key Laboratory of Soft Soils and Geoenvironmental Engineering,Ministry of Education, and Department of Civil Engineering,Zhejiang University,Hangzhou 310027,China
The symplectic approach proposed and developed by Zhong et al. in 1990s for elasticity problems is a rational analytical method, in which ample experience is not needed as in the conventional semi-inverse method. In the symplectic space, elasticity problems can be solved using the method of separation of variables along with the eigenfunction expansion technique, as in traditional Fourier analysis. The eigensolutions include those corresponding to zero and nonzero eigenvalues. The latter group can be further divided into α-and β-sets. This paper reformulates the form of β-set eigensolutions to achieve the stability of numerical calculation, which is very important to obtain accurate results within the symplectic frame. An example is finally given and numerical results are compared and discussed.
A recursive formulation is proposed for the method of reverberation-ray matrix (MRRM) to exactly analyze the free vibration of a multi-span continuous rectangular Kirchhoff plate, which has two oppo- site simply-supported edges. In contrast to the traditional MRRM, numerical stability is achieved by using the present new formulation for high-order frequencies or/and for plates with large span-to-width ratios. The heavy computational cost of storage and memory are also cut down. An improved recursive formulation is further proposed by modifying the iterative formula to reduce the matrix inversion op- erations. Numerical examples are finally given to demonstrate the effectiveness and efficiency of the proposed recursive formulae.
A general formulation of the method of the reverberation-ray matrix (MRRM) based on the state space formalism and plane wave expansion technique is presented for the analysis of guided waves in multilayered piezoelectric structures. Each layer of the structure is made of an arbitrarily anisotropic piezoelectric material. Since the state equation of each layer is derived from the three-dimensional theory of linear piezoelectricity, all wave modes are included in the formulation. Within the framework of the MRRM, the phase relation is properly established by excluding exponentially growing functions, while the scattering relation is also appropriately set up by avoiding matrix inversion operation. Consequently, the present MRRM is unconditionally numerically stable and free from computational limitations to the total number of layers, the thickness of individual layers, and the frequency range. Numerical examples are given to illustrate the good performance of the proposed formulation for the analysis of the dispersion characteristic of waves in layered piezoelectric structures.
GUO YongQiang1, CHEN WeiQiu2,3 & ZHANG YongLiang4 1 Key Laboratory of Mechanics on Disaster and Environment in Western China, Ministry of Education, and School of Civil Engineering and Mechanics, Lanzhou University, Lanzhou 730000, China
This paper studies the problem of a functionally graded piezoelectric circular plate subjected to a uniform electric potential difference between the upper and lower surfaces. By assuming the generalized displacements in appropriate forms,five differential equations governing the generalized displacement functions are derived from the equilibrium equations. These displacement functions are then obtained in an explicit form,which still involve four undetermined integral constants,through a step-by-step integration which properly incorporates the boundary conditions at the upper and lower surfaces. The boundary conditions at the cylindrical surface are then used to determine the integral constants. Hence,three-dimen sional analytical solutions for electrically loaded functionally graded piezoelectric circular plates with free or simply-supported edge are completely determined. These solutions can account for an arbitrary material variation along the thickness,and thus can be readily degenerated into those for a homogenous plate. A numerical example is finally given to show the validity of the analysis,and the effect of material inhomogeneity on the elastic and electric fields is discussed.
<正>The static and dynamic problems of an imperfectly bonded,orthotropic,piezoelectric laminate in cylindrical ...
Yun-ying ZHOU,Wei-qiu CHEN School of Aeronautics and Astronautics,Zhejiang University,Hangzhou 310027,China Chao-feng L Department of Civil Engineering,Zijingang Campus,Zhejiang University,Hangzhou 310058,China
<正>This work presents an approach named direct displacement method to investigate the free axisymmetric vibrat...
Yun WANG School of Mechanical Engineering,Hangzhou Dianzi University,Hangzhou,Zhejiang 310018,China Rong-qiao XU,Hao-jiang Ding Department of Civil Engineering,Zhejiang University,Hangzhou,Zhejiang 310058,China
