La0.67Ca0.33MnO3 thin films are fabricated on fluorine-doped tin oxide conducting glass substrates by a pulsed laser deposition technique with SrTiO3 used as a buffer layer. The current-voltage characteristics of the heterojunctions exhibit an asymmetric and resistance switching behaviour. A homogeneous interface-type conduction mechanism is also reported using impedance spectroscopy. The spatial homogeneity of the charge carrier distribution leads to field- induced potential-barrier change at the Au-La0.67Ca0.33MnO3 interface and a concomitant resistance switching effect. The ratio of the high resistance state to the low resistance state is found to be as high as 1.3 × 10 4 % by simulating the AC electric field. This colossal resistance switching effect will greatly improve the signal-to-noise ratio in nonvolatile memory applications.
The fully transparent indium–tin-oxide/BaSnO3/F-doped SnO2 devices that show a stable bipolar resistance switching effect are successfully fabricated. In addition to the transmittance being above 87% for visible light, an initial forming process is unnecessary for the production of transparent memory. Fittings to the current–voltage curves reveal the interfacial conduction in the devices. The first-principles calculation indicates that the oxygen vacancies in cubic BaSnO3 will form the defective energy level below the bottom of conduction band. The field-induced resistance change can be explained based on the change of the interfacial Schottky barrier, due to the migration of oxygen vacancies in the vicinity of the interface.This work presents a candidate material BaSnO3 for the application of resistive random access memory to transparent electronics.
Stoichiometric Ba(Mn_xTi_(1-x)O_3) (BMT)thin films with various values of x were deposited on Si(111)substrates by the sol-gel technique.The influence of Mn content on the optical properties was studied by spectroscopic ellipsometry(SE)in the UV–Vis–NIR region.By fitting the measured ellipsometric parameter(Ψand)with a four-phase model(air/BMT+voids/BMT/Si(111)),the key optical constants of the thin films have been obtained.It was found that the refractive index n and the extinction coefficient k increase with increasing Mn content due to the increase in the packing density.Furthermore,a strong dependence of the optical band gap Egon Mn/Ti ratios in the deposited films was observed,and it was inferred that the energy level of conduction bands decreases with increasing Mn content.
The resistive switching properties in amorphous Pr0.67Sr0.33MnO3 films deposited by pulsed laser deposition are investigated.Reproducible and bipolar counter-8-shape and 8-shape switching behaviours of Au/Pr0.67Sr0.33MnO3 /F:SnO2 junctions are obtained at room temperature.Dramatically,the coexistence of two switching polarities could be reversibly adjusted by an applied voltage range.The results allocated those two switching types to areas of different defect densities beneath the same electrode.The migration of oxygen vacancies and the trapping effect of electrons under an applied electric field play an important role.An interface-effect-related resistance switching is proposed in an amorphous Pr0.67Sr0.33MnO3-based memory cell.
