Optical gain and thermal carrier loss distributions regarding current diffusion and various electric contact areas are investigated to improve the near-field modes from the ring-shape to a Gaussian-like configuration for extra-broad-area and oxide-confined vertical-cavity surface-emitting lasers. In this work an equivalent circuit network model is used. The resistance of the continuously-graded distributed Bragg reflectors(DBRs), the current diffusion and the temperature effect due to different electric-contact areas are calculated and analyzed at first, as these parameters affect one another and are the key factors in determining the gain and thermal carrier loss. Finally, the gain and thermal carrier loss distributions are calculated and discussed.
The whispering-gallery-mode (WGM) photonic crystal microcavity can be potentially used for miniaturized photonic devices, such as thresholdless lasers. In this paper, we use plane wave expansion (PWE) method and study the WGM of H2 photonic crystal microcavities which are formed by removing seven center air holes in a photonic crystal. The WGM in these large-size cavities has some advantages compared with single defect WGM in the view of real device applications. We analyze the nearby air hole effect on WGM and conclude that WGM is more sensitive to moving towards the outside rather than moving towards the inside of a nearby air hole. In our case, if a nearby air hole is moved 0.1a away from the center, the WGM will disappear. If a nearby air hole is moved 0.6a towards the center, however, the WGM will still exit. We also analyze the structure with an air hole (rm= 0.2a) in the center of the microcavity, and we find that the WGM is not affected by the central hole sensitively. As we increase rm, the WGM remains unchanged until rm is 0.64 times greater than period a. It is found that the tolerance of WGM to the displacement of nearby air holes and the occurance of central holes is large enough to fabricate electrical injection structure.
The hydrogen bond(HB) is an important type of intermolecular interaction, which is generally weak, ubiquitous,and essential to life on earth. The small mass of hydrogen means that many properties of HBs are quantum mechanical in nature. In recent years, because of the development of computer simulation methods and computational power, the influence of nuclear quantum effects(NQEs) on the structural and energetic properties of some hydrogen bonded systems has been intensively studied. Here, we present a review of these studies by focussing on the explanation of the principles underlying the simulation methods, i.e., the ab initio path-integral molecular dynamics. Its extension in combination with the thermodynamic integration method for the calculation of free energies will also be introduced. We use two examples to show how this influence of NQEs in realistic systems is simulated in practice.
The resistance characteristics of a continuously-graded distributed Bragg reflector(DBR) in a 980-nm verticalcavity surface-emitting laser(VCSEL) are modeled in detail.The junction resistances between the layers of both the p-and n-DBR mirrors are analysed by combining the thermionic emission model and the finite difference method.In the meantime,the intrinsic resistance of the DBR material system is calculated to make a comparison with the junction resistance.The minimal values of series resistances of the graded p-and n-type DBR mirrors and the lateral temperature-dependent resistance variation are calculated and discussed.The result indicates the potential to optimize the design of the DBR reflectors of the 980-nm VCSELs.
