The process of laser cladding procedure has a closely relation with properties of composite cladding layers. When the input power of laser is certain, the low scanning velocity makes substrate with ahead of laser beam heat for a long time, which worsens interface bonding from surface oxidized; much higher scanning velocity makes the powder’s synthesis near substrate uncompleted fully, the remained powder in interface worsens interface bonding as well. Otherwise, the input specific energy of laser influences on in-situ synthesis courses. If the input energy is lower, the synthesis is not completed fully. In addition, the low temperature effects not only restrict the dispersion of particle leading uneven distribution of TiC, but also form some regions consisting of Al and Al 3Ti.
A novel model was presented to predict the evolutionary development of cladding layer,and a method based on Lambert-Beer theorem and Mie's theory was adopted to treat the interaction between powder stream and laser beam. By using the continuum model and enthalpy-porosity method, the fluid flow and heat transfer in solid-liquid phase change system were simulated. The commercial software PHOENICS, to which several modules were appended, was used to accomplish the simulation. Numerical computation was performed for Stellite 6 cladding on steel, the obtained results are coincident with those measured in experiment basically.