Due to the restrictions of ports, maneuverability of berthing ships will be affected significantly by water depth. In the present study, numerical simulation of the berthing maneuver of a ship with prescribed translational motion is performed by solving the Reynolds-averaged Navier-Stokes(RANS) equations based on overset grid,and the effects of the quaywall and freesurface are taken into consideration. To validate the present numerical method, comparison is performed between our results and the other results or measurements. It is found that the agreement is significantly better than that resulting from previous CFD-based approach. Subsequently, the effects of various water depths are investigated to evaluate their influences on hydrodynamic forces. The present results can provide helpful guidance on safe maneuvering for vessels' berthing and fender system design in quays.
Numerical study about vortex-induced vibration (V/V) related to a flexible riser model in consideration of internal flow progressing inside has been performed. The main objective of this work is to investigate the coupled fluid-structure interaction (FSI) taking place between tensioned riser model, external shear current and upward-progressing internal flow (from ocean bottom to surface). A CAE technology behind the current research which combines structural software with the CFD technology has been proposed. According to the result from dynamic analysis, it has been found that the existence of upward-progressing internal flow does play an important role in determining the vibration mode (/dominant frequency), vibration intensity and the magnitude of instantaneous vibration amplitude, when the velocity ratio of internal flow against external current is relatively high. As a rule, the larger the velocity of intemal flow is, the more it contributes to the dynamic vibration response of the flexible riser model. In addition, multi-modal vibration phenomenon has been widely observed, for asymmetric curvature along the riser span emerges in the case of external shear current being imposed.