In order to design a multilayer dielectric grating with wide-bandwidth diffraction spectrum, the restriction factors of both the reflection bandwidth of multilayer dielectric high-reflectivity mirror and the guided-mode resonance phenomenon are studied in detail. The reflection characteristics of high-reflectivity mirror in zeroth and 1st transmitted diffraction orders are quantitatively evaluated. It is found that the reflection bandwidth of high-reflectivity mirror in 1st transmitted diffraction order, which determines the final diffraction bandwidth of multilayer dielectric grating, is evidently compressed. Furthermore, it is demonstrated that the reducing of grating period is an effective approach to the elimination of guided mode resonance over a required broad band range both spectrally and angularly. In addition, the expressions for calculating the maximum period ensuring no guided mode resonance in the required bandwidth are derived. Finally, two high-efficiency pulse-compression gratings with broad-band are presented.
In this paper,a new type of resonant Brewster filter(RBF) consisting of two homogenous layers and a single grating with an equal refractive index is presented.The properties are studied by using the plane waveguide method(PWM) and rigorous coupled-wave analysis(RCWA).It is found that the variation of the grating thickness does not effectively change the position of the resonant wavelength,however it has a remarkable effect on the line width,and the resonant peak can be adjusted back to its original position by slightly tuning the grating period.Moreover,by simultaneously tuning the thicknesses of the homogeneous layers above and beneath the grating structure,multiple channels can also be obtained when the RBF is illuminated at the Brewster angle calculated with the effective medium theory(EMT) of subwavelength grating.The adjacent optical thickness for acquiring the multiple channels is about three-quarters of the resonant wavelength.Furthermore,it is demonstrated that the line width at the operating resonant wavelength can be appreciably narrowed by tuning the thickness of the homogenous layer to its corresponding thickness without fine tuning the grating period or the thickness.Therefore,it is very useful for designing filters with different line widths at the desired wavelength.In addition,it is shown from our calculations that the symmetrical line feather can be obtained if the total optical thickness for the homogeneous layer meets the special condition.
A broadband non-polarizing beam splitter (NPBS) operating in the telecommunication C+L band is designed by using the guided mode resonance effect of periodic silicon-on-insulator (SOI) elements. It is shown that this double layer SOI structure can provide ～50/50 beam ratio with the maximum divergences between reflection and transmission being less than 8% over the spectrum of 1.4 μm～1.7 μm and 1% in the telecommunication band for both TE and TM polarizations. The physical basis of this broadband non-polarizing property is on the simultaneous excitation of the TE and TM strong modulation waveguide modes near the designed spectrum band. Meanwhile, the electric field distributions for both TE and TM polarizations verify the resonant origin of spectrum in the periodic SOI structure. Furthermore, it is demonstrated with our calculations that the beam splitter proposed here is tolerant to the deviations of incident angle and structure parameters, which make it very easy to be fabricated with current IC technology.
A broad band polarization-independent reflector working in the telecommunication C+L band is proposed using the guided mode resonance effect of a periodic surface relief element deposited by a layer of silicon medium. It is shown that this structure can provide high reflection (R > 99.5%) and wide angular bandwidth (θ≈ 20 , R > 98%) for both TE and TM polarizations over a wide spectrum band 1.5 μm～1.6 μm. Furthermore, it is found by rigorous coupled wave analysis that the polarization-independent reflector proposed here is tolerant of a deviation of grating thickness, which makes it very easy to fabricate in experiments.
