A fully-differential switched-capacitor sample-and-hold （S/H） circuit used in a 10-bit 50-MS/s pipeline analog-to-digital converter （ADC） was designed and fabricated using a 0.35-μm CMOS process. Capacitor flip-around architecture was used in the S/H circuit to lower the power consumption. In addition, a gain-boosted operational transconductance amplifier （OTA） was designed with a DC gain of 94 dB and a unit gain bandwidth of 460 MHz at a phase margin of 63 degree, which matches the S/H circuit. A novel double-side bootstrapped switch was used, improving the precision of the whole circuit. The measured results have shown that the S/H circuit reaches a spurious free dynamic range （SFDR） of 67 dB and a signal-to-noise ratio （SNR） of 62.1 dB for a 2.5 MHz input signal with 50 MS/s sampling rate. The 0.12mm^2 S/H circuit operates from a 3.3 V supply and consumes 13.6 mW.
