为研究爆破荷载作用下岩石动态断裂过程,采用相关键元胞(Correlated Lattice Bond Cell,CLBC)模型对岩石进行力学建模,提出了一种适用于岩石动态断裂过程的键势函数,该势函数同时反映了岩石的可压缩性、裂尖材料超弹性及弹脆性特征,发展了一种爆破荷载施加方法.结果表明:该方法能够再现爆破荷载作用下的动态裂纹扩展过程及其基本特征;地应力对爆生裂纹扩展方向具有较强的影响,裂纹总是倾向于沿最大地应力方向扩展;为爆破荷载作用下的岩石动态断裂模拟提供了一种简单可行的方法.
In fracture simulation,how to model the pre-existing cracks and simulate their propagation without remeshing is an important topic.The newly developed triangular element partition method(TEPM)provides an efficient approach to this problem.It firstly meshes the cracked body regardless of the geometry integrity of the interesting object with triangular elements.After the meshing procedure is completed,some elements are intersected by cracks.For the element intersected by a crack,the TEPM takes the element partition technique to incorporate the discontinuity into the numerical model without any interpolation enrichment.By this approach,the TEPM can simulate fracture without mesh modification.In the TEPM,all the cracked elements are treated as the usual partitioned elements in which the crack runs through.The virtual node pairs(the intersection points of crack faces and elements)at the opposite faces of the crack move independently.Their displacements are respectively determined by their neighbor real nodes(nodes formatted in the original mesh scheme)at the same side of the crack.However,among these cracked elements,the element containing a crack tip,referred to as the crack tip element thereafter,behaves differently from those cut through by the crack.Its influence on the singular field at the vicinity of the fracture tip becomes increasingly significant with the element size increasing.In the crack tip element,the virtual node pair at the crack tip move consistently before fracture occurs while the virtual node pair separate and each virtual node moves independently after the fracture propagates.Accordingly,the crack tip element is automatically transformed into the usual partitioned element.In the present paper,the crack tip element is introduced into the TEPM to account for the effect of the crack tip.Validation examples indicate that the present method is almost free from the element size effect.It can reach the same precision as the conventional finite element method under the same meshing scheme.But the TEPM i
