A model to describe the hysteresis damping characteristic of rubber material was presented.It consists of a parallel spring and damper,whose coefficients change with the vibration amplitude and frequency.In order to acquire these relations,force decomposition was carried out according to some sine vibration measurement data of nonlinear forces changing with the deformation of the rubber material.The nonlinear force is decomposed into a spring force and a damper force,which are represented by the amplitude-and frequency-dependent spring and damper coefficients,respectively.Repeating this step for different measurements gives different coefficients corresponding to different amplitudes and frequencies.Then,the application of a parameter identification method provides the requested approximation functions over amplitude and frequency.Using those formulae,as an example,the dynamic characteristic of a hollow shaft system supported by rubber rings was analyzed and the acceleration response curve in the centroid position was calculated.Comparisons with the sine vibration experiments of the real system show a maximal inaccuracy of 8.5%.Application of this model and procedure can simplify the modeling and analysis of mechanical systems including rubber materials.
The first resonant(anti-resonant)frequency and sound absorption coefficient of metal rubber(MR) material are theoretically studied with hard backed samples and with air layer.The equations of the first resonant and anti-resonant frequencies of MR are deduced from the undamped propagation characteristics of porous material.The first resonant and anti-resonance sound absorption coefficients are induced according to the theoretical formula for the acoustic characteristic parameters of MR,and the former is modified while the energy consumption at resonance is taken into consideration.The good agreement between the calculation results of these resonant sound absorption parameters and the experimental results verifies the effectiveness of this calculation method for the performance evaluation of MR as a sound absorption material.
