A novel composite charged mosaic membrane(CCMM) was prepared via interfacial polymerization(IP) of polyamine[poly(epichlorohydrin amine) ]and trimesoyl chloride(TMC) on the polyethersulfone(PES) support. Fourier transform infrared spectroscopy(FT-IR) ,environmental scanning electron microscopy(ESEM) ,atomic force microscopy(AFM) and water contact angle analysis were applied to characterize the resulted CCMM.The FT-IR spectrum indicates that TMC reacts sufficiently with polyamine.ESEM and AFM pictures show that the IP process produces a dense selective layer on the support membrane.The water contact angle of the CCMM is smaller than that of the substrate membrane because of the cross-linked hydrophilic polyamine network.Several factors affecting the IP reaction and the performance of the CCMM,such as monomer concentration,reaction time,pH value of aqueous phase solution and post-treatment,were studied.The pure water flux of the optimized CCMM is 14.73 L·m -2 ·h -1 ·MPa -1 at the operating pressure of 0.4 MPa.The values of separation factorαfor NaCl/PEG1000/water and MgCl2/PEG1000/water are 11.89 and 9.96,respectively.These results demonstrate that CCMM is promising for the separation of low-molecular-weight organics from their salt aqueous solutions.
