A visco-plastic rate-dependent homogenization theory for particle-reinforced composites was derived and the equivalent elastic constants and the equivalent visco-plastic parameters of these composites were obtained. A framework of homogenization the- ory for particle-reinforced W-Ni-Fe composites, a kind of tungsten alloy, was established. Based on the homogenization theory and a fixed-point iteration method, a unit cell model with typical microstructnres of the composite was established by using dynamic analysis program. The effects of tungsten content, tungsten particle shape and particle size and interface strength on the mechanical properties and the crack propagation of the W-Ni-Fe composite are analyzed under quasi-static and dynamic loadings. The stress-strain curves of the composite are given and the relation between the macro-mechanical characteristics and the microstructure parameters is explored, which provides an important theoretical basis for the optimization of the W-Ni-Fe composites.
We report here the additive Runge-Kutta methods for computing reactive Euler equations with a stiff source term, and in particular, their applications in gaseous detonation simulations. The source term in gaseous detonation is stiff due to the presence of wide range of time scales during thermal-chemical non-equilibrium reactive processes and some of these time scales are much smaller than that of hydrodynamic flow. The high order, L-stable, additive Runge-Kutta methods proposed in this paper resolved the stiff source term into the stiff part and non-stiff part, in which the stiff part was solved implicitly while the non-stiff part was handled explicitly. The proposed method was successfully applied to simulating the gaseous detonation in a stoichiometric H2/O2 /Ar mixture based on a detailed elementary chemical reaction model comprised of 9 species and 19 elementary reactions. The results showed that the stiffly accurate additive Runge-Kutta methods can capture the discontinuity well, and describe the detonation complex wave configurations accurately such as the triple wave structure and cellular pattern.
Damage and failure of quasi-brittle materials are caused by the evolution and coalescence of micro-cracks.To solve the problem of elliptical micro-crack growth at the elastic deformation stage,a method of complex potential functions is proposed and the effect of the initial orientation on micro-crack growth and deflection is discussed.The critical stress condition for the initial damage is derived according to the criterion of micro-crack growth.Based on energy conservation during wing-crack propagation,a damage constitutive model is developed with the strain criterion created in the condition of micro-crack coalescence.The stress-strain curves of quasi-brittle materials in uniaxial compression obtained based on this model are examined with the experimental results.
