A series of novel wide bandgap small molecules(IFT-ECA, IFT-M, IFT-TH and IFT-IC) based on the A-D-A structure with indenofluorene core, thiophene bridge, and different electron-deficient end-capping groups, were synthesized and used as non-fullerene acceptors in organic solar cells. The influences of end-capping groups on the device performance were studied.The four materials exhibited different physical and chemical properties due to the variation of end-capping groups, which further affect the exciton dissociation, charge transport, morphology of the bulk-heterojunction films and device performance. Among them, IFT-IC-based device delivered the best power conversion efficiency of 7.16% due to proper nano-scale phase separation morphology and high electron mobility, while the devices based on the other acceptors achieved lower device performance(4.14% for IFT-TH, <1% for IFT-ECA and IFT-M). Our results indicate the importance of choosing suitable electron-withdrawing groups to construct high-performance non-fullerene acceptors based on A-D-A motif.
Jianchao JiaNannan ZhengZhenfeng WangYunping HuangChunhui DuanFei HuangYong Cao
Remarkable progress Indeed,in high-performance power polymer solar cells demonstrates their great potential for practical groups,applications which in the near future.the conversion efficiencies over 10%have been and reported device by many research are achieved review,through rational optimization recent of light-harvesting of materials,interfaces solar processing technologies.In this mini we summarized molecular the progress highly efficient polymer cells,with specifically concern on successful strategies and of rational design of electron-donating and electron-accepting materials,elaborative interfacial engineering,reasonable device architectures.
设计合成了Por-N,Por-NBr,Por-Cu-N和Por-Cu-NBr四种水醇溶性小分子卟啉衍生物.对这类卟啉小分子衍生物的紫外可见吸收光谱研究表明,基于金属铜配位的卟啉小分子衍生物较未配位化合物有微弱的蓝移.循环伏安法对这类小分子卟啉衍生物的研究表明,基于金属铜配合物的卟啉衍生物的最高占有分子轨道能级均没有明显变化.采用空间电荷限制电流方法对小分子卟啉衍生物的研究表明,基于金属铜配位的卟啉小分子衍生物的电子迁移率得到明显提高.以聚合物PCE10为给体材料,富勒烯衍生物PC71BM为受体材料,以及合成的小分子卟啉衍生物为阴极界面层制备了结构为ITO/PEDOT:PSS/PCE10:PC71BM/卟啉小分子衍生物/Al的聚合物太阳电池器件.器件研究结果表明,化合物Por-NBr,Por-Cu-N与Por-Cu-NBr作为电子传输层的器件的光电转换效率达到9%以上,其中以Por-Cu-N作为阴极界面层的器件达到的最高效率为9.12%,相应器件的短路电流密度,开路电压以及填充因子分别为16.91 m A·cm-2,0.79 V和68.1%.表明这类水醇溶性小分子卟啉衍生物作为聚合物太阳电池的阴极界面层有着广阔的应用前景.
Three small molecules with the same arms and different cores of perylene diimide(PDI)or indaceno[2,1-b:6,5-b']dithiophene(IDT)were designed and synthesized as the acceptor materials for P3HT-based bulk-heterojunction(BHJ)solar cells.The impacts of the different cores on the optical absorption,electrochemical properties,electron mobility,film morphology,photoluminescene characteristics,and solar cell performance were thoroughly studied.The three compounds possess a broad absorption covering the wavelength range of 400–700 nm and relatively low lowest unoccupied molecular orbital(LUMO)energy levels of?3.86,?3.81 and?3.99 eV.The highest power conversion efficiency of 0.82%was achieved for the BHJ solar cells based on SM3 as the acceptor material,the compound with a PDI core.
LIU XinCAI PingCHEN DongChenCHEN JunWuSU ShiJianCAO Yong
A series of novel acceptor-pended conjugated polymers featuring a newly developed carbazole-derived unit are designed and synthesized. The relationships between chemical structure and optoelectronic properties of the polymers are systematically investigated.The control of UV-Vis absorption spectra and energy levels in resulting polymers are achieved by introducing suitable pended acceptor units. The photovoltaic properties of the resulting polymers are evaluated by blending the polymers with(6,6)-phenyl-C71-butyric acid methyl ester. The resulting solar cells exhibit moderate performances with high open-circuit voltage. Charge transport properties and morphology were investigated to understand the performance of corresponding solar cells.
Zhihong WuYongxiang ZhuWei LiYunping HuangJunwu ChenChunhui DuanFei HuangYong Cao
