A method of direct contact membrane distillation (DCMD) with a self-made hollow polyvinylidene fluoride membrane was applied to prepare high concentration polyaluminum chloride (PACl) with high Alb content based on chemical synthesis. The permeate flux and Al species distribution were investigated. The experimental results showed that the permeate flux decreased from 14 to 6 kg/(m2·hr) at the end of the DCMD process, which can be mainly attributed to the formation of NaCl deposits on the membrane surface. The Alb content decreased slightly, only from 86.3% to 84.4%, when the DCMD experiment finished, correspondingly the Alc content increased slightly from 7.2% to 8.5%, and the Ala content remained at 7% during the whole DCMD process. A PACl with Alb content of 84% at total aluminum concentration 2.2 mol/L was successfully prepared by the chemical synthesis-DCMD method.
The removal of As(V) from synthetic water was studied using four different nanofiltration (NF) membranes (ESNA-1-K1, NF270, ESNA-1-LF, and HODRA-CORE). The influences of ion concentration, transmembrane pressure (TMP), and the presence of natural organic matter (humic acid, HA) on the arsenic removal efficiency and permeate flux were investigated. The arsenic rejection of ESNA- 1-LF was higher than those of the other membranes in all experiments (> 94%), and the HODRA-CORE membrane gave the lowest removal of arsenic (< 47%). An increase in the ion concentration in the feed solution and addition of HA decreased the arsenic rejection of the HODRA-CORE membrane. However, both increasing of the ion concentration and addition of HA made the rejection increased for the other membranes (ESNA-1-K1, NF270, and ESNA-1-LF). With increasing TMP, for all four NF membranes, increases in both arsenic rejection and permeate flux were observed. The permeate fluxes of the four NF membranes decreased to some extent after addition of HA to the solutions for operating time of 6 hr.
Yang YuChangwei ZhaoYangui WangWeihong FanZhaokun Luan
